Re: mV input and D/A

[mooney@aps.anl.gov (Tim Mooney)]

re...
> I would like to know what other groups are doing or planning to do for:
> 
> - Reading mV inputs.  We need to read thermocouples and other low voltage
>   devices.  A few Hz input rate is fine.

We've used Keithley 2000's (via RS232) for this.  With a scanner attachment,
we can read ten signals slowly or one signal at a few Hz.

We've also used Love controllers via RS485.

> - Analog output.  A few Hz output rate is OK for present applications.

We're using a Systran 12-bit DAC IndustryPack module for this.

Tim