[Date Prev][Date Next][Date Index]
Re: Standard coordinate system
- Subject: Re: Standard coordinate system
- From: 'Thomas A. Coleman' <coleman@anel19.el.anl.gov>
- Date: Mon, 16 Feb 1998 09:54:49 -0600
> 1) What beamline coordinate system does your CAT use?
SBC-CAT uses the XFD and ASD standard identified by Tim Mooney:
+Z is the beam direction, +Y is up, and +X is out from the storage ring
BIO-CAT also uses this common coordinate system due to shared software.
> 2) What is the beam direction in your CAT's user displays?
Graphical displays show beam direction from right-to-left.
In the case of component lists, they are presented from top to bottom.
--
Thomas A. Coleman
Electronics and Computing Technologies Division
Argonne National Laboratory
TAColeman@anl.gov