RE: step-motor controller/driver connection

[mooney@oxygen.aps1.anl.gov (Tim Mooney)]

Larry Finger writes:

> I agree that the functionality possible with DB25 more than overcomes 
> the difficulty with real estate.  I suggest, however, that the 
> uncommitted pins be assigned (in decreasing priority) to pin numbers 
> 1, 13, 14, 25, 3, 12.  With this scheme, any cuts on the edges of
> ribbon cables have to be deeper to break a needed conductor.

That's a good idea.  I'll rework the pinout and repost when I've gotten Leo's
comments.

Tim