[Date Prev][Date Next][Date Index]
Rrequest for CAMAC crate loaner
- Subject: Rrequest for CAMAC crate loaner
- From: Joe Sullivan <sullivan@aps.anl.gov>
- Date: Fri, 03 May 2002 15:04:07 -0500
Hi all,
Please contact me if you have a CAMAC crate (with +/-12V) I can borrow
for about
2 months. I have a Data Design Minicrate 1000 on order but they are
quoting a 6-8 week delivery.
I was scaling the CAMAC learning curve with M. Rivers' Epics support and
a XIA DXP-2X (2 channel)
module using an older crate and learned that the 12V power supply is
optional in the CAMAC specs.
The DXP-2C (unlike the earlier DXP-4C) will error during
'dxp_initialize' if +/-12V is not present.
The error message is 'Timeout waiting for DSP BUSY = 0' in case you run
into the same thing.
I would like to get the first SRI-CAT CAMAC module running in time for
the next APS run so
please help.
Thanks.
Joe Sullivan
APS/BCDA
(630)252-8657