[Date Prev][Date Next][Date Index]
EPICS 3.13 application software distribution
- Subject: EPICS 3.13 application software distribution
- From: mooney@aps.anl.gov (Tim Mooney)
- Date: Thu, 26 Jun 1997 18:59:27 -0500
Dear folks,
I've finally put some promised EPICS R3.13-compatible application
software in the EPICS Software Distribution's custom software section
http://www.aps.anl.gov/xfd/WWW/xfd/SoftDist/Welcome.html#Custom_EPICS
The tar file includes the following records, device support, drivers,
etc.:
motor stepmotor, with device and driver support for Oregon
Microsystems and Highland Technology controllers
scaler scalers, with device support for the Joerger VSC8
and VSC16
scanparm scan parameters for use with the scan record
table 6-degree-of-freedom optical table
transform sort of an array of 16 calc records, with output links
serial Mark Rivers' generic serial record, with device support
for hideos-supported Industry Pack modules (IP-Octal*)
vme Mark Rivers' generic vme record
gpib Mark Rivers' generic GPIB record, with device support
for GPIB devices supported by the standard EPICS GPIB
driver
mca Mark Rivers' support for Canberra AIM multichannel
analyzer
drvVaroc Karen Coulter's (and others?) support for the ESRF's
SSI absolute encoder interface board
autosave/restore Bob Dalesio's save_restore/dbrestore (i.e.,
bumpless reboot) software, with some patches
we've found useful.
hideos executables Now hideos IndustryPack support runs on an
MVME162 under VxWorks (alongside EPICS) as well
as on a bare MVME162.
devAiHeidND261 Heidenhain ND261 incremental encoder (RS232)
dev*HeidAWE1024 Heidenhain AWE1025 encoder interpolator (GPIB)
dev*StrParm Hideos serial device support with dct-specified
string termination, parsing, timeout, etc.
dev*Elcomat Moller-Wedel Elcomat autocollimator
dev*HP10895LaserAxis Hewlett-Packard laser interferometer
Various hideos device-support modules
There are two versions of the tar file: an unprotected file that contains
the source code described above and a bunch of databases, medm display files,
BURT include files, autosave request files, sample startup files, and docs
xfdApp_R3.13.0.beta7_unbuilt.tar.gz
and a password-protected file that includes all of the above plus
the latest patched VxWorks 5.2 images for MVME167 and MVME162, some
statically linked extensions for sun4 and solaris, and a prebuilt user
tree
xfdApp_R3.13.0.beta7.tar.gz
You must have a VxWorks target license (and prove it) to download
xfdApp_R3.13.0.beta7.tar, but you don't need *anything* else to run it.
------------------------------------
Tim Mooney
Beamline Controls & Data Acquisition
Advanced Photon Source