[Date Prev][Date Next][Date Index]
Re: step-motor controller/driver connection
- Subject: Re: step-motor controller/driver connection
- From: Mark Rivers <RIVERS@cars3.uchicago.edu>
- Date: Tue, 25 Oct 1994 13:09:51 -0500 (CDT)
Tim,
This seems like a good idea. I am not crazy about D connectors because they
are not easily secured (tiny little screws which always get lost).
Are there other signals we need. +5V is needed by the optical encoders on many
motors, but I guess that comes from the new Step Pak to the motors, not in
this interface.
Mark